Unitec
Helmsdorf GmbH, Helmsdorf, Fabrikstr. 21, D-01833 Stolpen, Germany Phone: +49 35973/ 281 0 ; Fax: +49 35973/ 281 51 e-mail:
info@unitec-helmsdorf.de Internet: www.unitec-helmsdorf.de |
|
|
Product
Information
ELASTOSALâNR 200
METAL BONDING AGENT
Uses: Bonding agent for gluing highly elastic rubber
based on NR (natural rubber) to metal by means of the ELASTOSAL NR 100 contact
adhesive.
Specifications:
Colour: |
yellowish transparent |
Viscosity: |
approx 30 – 40 s (according to DIN flow cup nozzle
4) |
Density: |
approx. 1,2 g/cm³ |
Cleaner: |
ELASTOSAL Lösit MEK or
ELASTOSAL Lösit M (H5) |
Application: |
brush |
Yield: |
approx 100 – 200 g/m2 on smooth surface |
Drying time (21°C): |
approx. 30 min |
Hazardous material designation: |
Xn |
Shelf life: |
minimum of 6 months |
Storage requirements: |
dry, cool, free of
frost, in tightly closed buckets |
APPLICATION:
1) SURFACE PRE-TREATMENT
Make sure that metal surface
is clean, dry, fat-free and oil-free. Wash metal surface with a cleaning agent
(eg ELASTOSAL Lösit MEK)
and leave to dry completely (approx 30 min at room temperature). Slightly
roughen smooth surfaces (sandblasting) and remove all dust residues.
2) APPLICATION AND DRYING
Apply a thin and even layer
on the metal surface.
Leave the applied layer to
dry for approx 30 min (at room temperature) and afterwards (on the same day!)
conglutinate with contact glue ELASTOSAL NR 100.
Please note: The recommended
application conditions include a temperature of about 15 – 25 °C and a relative
air humidity of 30 – 65 %. In the event of extreme weather conditions, such as
cold, rain etc, please take necessary protection measures, such as extra
roofing, hot air supply at the workplace, in order to create the appropriate application
conditions.
Protection rules: Pay attention to
danger indications and safety instructions on the container! Ask for safety
data sheet!
Waste disposal number
according to EAK: 080404 (cured adhesives), 080406 (uncured adhesives)
Packaging: 400 g can, 900 g
can, 5.5 kg hobbock, 35 kg hobbock
Note: The content of the present product information is the result of
extensive research and experience in application methods. All information and
instruction is made to our best knowledge. It does not constitute a warranty
for qualities and does not release users from their obligation to test the
product’s suitability for their special purpose. The advice given in this
product information does not entail any liability whatsoever for compensation
irrespective of the kind of compensation and the legal right. We reserve the
right to make technical changes in the process of product development. (
2/2003)